USA compact tractor grading — land plane, box blade or bowl scraper

Choose the implement around where the soil must finish. A land plane commonly redistributes loose material along a lane. A box blade can cut and drag material in front of its blade. A bowl scraper provides a place to collect material and carry it to a selected fill area. The details depend on the implement’s design and working setup.

Match the job to the way material moves

ImplementTypical taskWhat to check
Land plane / grading scraperRegular maintenance of a loose gravel driveway or farm lane.Whether repeated passes will restore the needed crown and drainage.
Box bladeCutting, loosening and dragging material over relatively short distances.Tractor linkage, traction and how the operator will control the final grade.
Pull-type bowl scraperCollecting material, carrying it to another part of the job and placing it.Permitted loaded mass, drawbar, hydraulics, travel path and discharge clearance.

US sellers sometimes use “scraper” for different implement types. Look at the bowl, blade, material path and unloading method when comparing a grading scraper, pull pan or pull-type scraper. Bush Hog’s published pull-type range provides an example of equipment sold for material movement and finish grading; its specifications belong to that range.

Dugong dimensions in US and metric units

Owner-confirmed nominal capacities and tractor ratings
Model and guideNominal capacityApprox. cubic yardsWorking widthRated tractor power (up to)
Dugong 9000.30 m³0.39 yd³Confirm current unitUp to 30 hp / approx. 22.4 kW
Dugong 12000.45 m³0.59 yd³Confirm current unitUp to 30 hp / approx. 22.4 kW
Dugong 14000.65 m³0.85 yd³Approx. 1.35 m / 4.43 ft in the saved model overview; confirm unitUp to 35 hp / approx. 26.1 kW

These supplied nominal capacities support initial planning. The source pages label them as nominal capacity. The owner confirms ratings up to 30 hp for the 900, 30 hp for the 1200 and 35 hp for the 1400. Confirm current dimensions, mass, hydraulic connections and permitted loads for the proposed rental unit.

For reference, 1 inch = 25.4 mm; 1 foot = 0.3048 m; 1 cubic yard ≈ 0.7646 m³. Values in the table are rounded conversions of the published metric planning figures.

Laser and GPS finish grading

A receiver mount locates a receiver on the scraper. A grade reference describes the intended surface. Automatic blade control additionally needs a compatible controller, hydraulic interface, configuration and calibration. Confirm the complete system and its demonstrated performance for the intended tractor.

Follow the receiver-to-control workflow.

Sources and further reading

Civil Levelling and Surface Water Management

Video details and summary · Dugong Scrapers on YouTube

Updated 2026-11-19